FIR125 FIRE BOX MODELS
Firebox Fire Box
The use of fire extinguishers is the maintenance of fire extinguishers used today in most factories, warehouses, offices and even residential homes.
The fire box is one of the first fire extinguishers to be used at the earliest moments of an accident, meaning it can prevent large flames from returning in the event that it can give residents more time to escape. .
Most of the boxes are available in red, gray and steel (silver), with an acronym F which stands for fire.
The contents of the fire boxes vary depending on the size and location used. These include hoses, nozzles, pulleys, valves and fire extinguisher couplings.
Kinds of firebox
Fire boxes are usually made of 4.5cm diameter hoses that wrap around a pulley.
Firebox firebox
These boxes are mostly used in public places that require a complete system.
Hose Reel Firebox Box
These contain plastic hoses that are low in diameter and are used in small, small buildings.
Hose Reel Fire Box
How to install a fire box
The boxes are mounted either vertically or horizontally, one hundred and thirty centimeters from the ground. Another point is that depending on the size of each floor or building, the number of fire boxes varies and the distance between the boxes in a building or floor should not be more than 30 meters.
Fire extinguishers must be installed in areas that are easily accessible to all and accessible to the public. Therefore, these boxes are installed near the entrance / exit of the desired location, which is the best place to install them.
https://www.lawyersclubindia.com/profile.asp?member_id=526053
Types of fire box network
In general, fire boxes are sold in two wet and dry networks.
More network
These systems, unlike dry systems, are connected to the municipal water pipe so that it flows through the nozzle valve and covers the whole building. The reason for naming it more is that it is always connected to the municipal water network. Is connected.
Dry grid
The dry box system of the fire box is not connected to the municipal water pipe and supplies the required water through the water tank of the fire engines. This is why they are installed near the entrance door of the intended location and on the ground floor to install a fire tank and use water if needed.
Fire extinguisher box
These boxes, as the name implies, are for holding a fire extinguisher and the only means of carrying it is a fire extinguisher.
These boxes have a variety of retainer boxes, ordinary boxes, etc. They are usually red and silver in color.
Fire extinguisher box
Fire125 fire box models
There are 8 types of fire125 fire box models that you can find by clicking on the link below
Fir125 fire box models
Standard Fire Box Installation:
Firebox boxes or fire extinguishers should be installed in places that are visible to everyone. So the best place to install these boxes is near the entrances and exits of the intended location. This means that you should not install the boxes behind walls or slots so that they can be easily used when needed. Basically, these boxes are installed on escalators, sidewalks, entrance doors of buildings, corridors and so on. Each fire box should cover at least a radius of 3 meters from its surroundings. Also, the maximum distance between boxes installed in one place should not be more than 2 meters. Another point to note is that the water conveyor pipe in the wet system must be connected to the main tap and that the pressure at the highest point should not be less than 2 atmospheres and that the diameter of the upstream pipe should not be less than 5 inches.
https://www.houzz.com/ideabooks/128102507/thumbs/firebox |
The maximum distance between mounting the fire reels is the same as a 30 meter fire box. The timely detection of fires can prevent personal injury and loss of capital. The methods and means of alert are varied and depending on the financial possibilities and the importance of the subject one of the manual or automatic methods is used.
- ۹۸/۰۹/۱۳